Telemisura e acquisizione dati di bordo

ACRA KAM-500 - soluzione rugged, modulare, miniatura

KAM-500 è un sistema di acquisizione e telemisura imbarcabile di tipo modulare, miniaturizzato, robusto ed affidabile, per condizionare e acquisire, tramite PCM IRIG-106 Ch.4 o Ethernet IENA / iNET-X, un elevato numero di parametri di misura.

Qualificato secondo normative MIL-STD, è utilizzato nei più importanti programmi di Flight-Testing e Certificazione di velivoli civili e militari, in attività OLM (Operational Load Monitoring) e HUMS, in applicazioni “space” e in molti settori della Difesa, nella sperimentazione di sistemi complessi, nell'acquisizione di segnali e dati su mezzi navali, nel testing di veicoli militari e non...

KAM-500 può essere configurato in modo single-chassis o multi chassis distribuito, PCM o Ethernet Network, ed offre un'ampia varietà di moduli per sensori di misura, segnali analogici e digitali, bus di controllo e comunicazione, Voce (CVSD), Video e per stream PCM; moduli di output analogico o digitale, di sincronizzazione del tempo GPS o IRIG, moduli BIT (Built In Test), per la verifica continua del corretto funzionamento del sistema in tutti i suoi aspetti.

Un particolare modulo matematico (KAD/MAT/101) consente processi in tempo reale per la creazione di parametri virtuali calcolati da quelli fisici acquisiti.

approfondisci
KAM-500, equipaggiato di modulo di memoria flash, removibile o scaricabile via Ethernet, opera come solid-state data-recorder.
DAS Studio è il software grafico di setup e gestione di KAM-500, sia per architetture basate su comunicazione interchassis di tipo PCM che per quelle Network Integrate (iNET).
 
Moduli di Acquisizione di KAM-500
Un’ampia gamma di moduli di condizionamento e acquisizione con ADC simultaneo e risoluzione fino a 16 bit e con trattamento digitale dei segnali, in modo da garantire elevata accuratezza in un ampio range di temperatura.
Sono disponibili per sensori a ponte estensimetrico, resistivi, potenziometrici e piezoelettrici, LVDT e RVDT, TC, RTD, scanner per pressioni e temperature, segnali in tensione e corrente…  
Moduli di acquisizione per segnali discreti: frequenza, periodo, eventi e per monitoring data parsing su bus digitali e avionici: RS232/422, ARINC429, MIL-STD-1553, STANAG-3910, Ethernet, AFDX, FireWire  
I moduli Video, con compressione H.264 o MPEG-4 (PAL o NTSC), offrono buona qualità delle immagini anche con bassi data-rate e permettono l’acquisizione di più sorgenti video sullo stesso data-link (PCM o Ethernet) utilizzato per i segnali e i dati di misura.

Telemisura e acquisizione dati di bordo

ACRA KAM-500 - soluzione rugged, modulare, miniatura


Prestazioni

Tipologia

sistema di acquisizione imbarcabile ruggedized, qualificato secondo normative MIL-STD

Alimentazione

28Vdc (nominale)

Protocolli di uscita

PCM secondo IRIG 106, Ethernet, ARINC429, ARINC573/717 (per crash recorder).

Slot per chassis

da 2 a 13 slot utente per chassis

Chassis per sistema

uno o più chassis secondo differenti tipologie di interconnessione PCM master/slave o Ethernet

Dimensioni

compatte; variabili in accordo alla tipologia di chassis

N° di canali

virtualmente illimitato

Data storage

CF removibile o memoria flash scaricabile via Ethernet.

Segnali e dati acquisibili

Analogici

tensione, corrente; sensori estensimetrici, potenziometrici resistivi, piezoelettrici e ICP compatibili, LVDT e RVDT, TC, RTD, scanner per pressioni e temperature; segnali synchro e 3-phase power

Digitali

frequenza, periodo, RPM, eventi discreti.

Bus

RS232/422/485, ARINC429, ARINC573, MIL-STD-1553, STANAG-3910, Ethernet, AFDX, FireWire, stream PCM, Panavia bus e Panavia MC/ENMC link, CANbus, CAIS…

Voce

due o più canali audio con compressione CVSD

Video

PAL, NTSC o Y/C (S-video) con compressione MPEG-4

Tempo

IRIG-B, GPS o IEEE 1588 PTP per configurazioni distribuite su Ethernet Network

 

 

Chassis e moduli standard (suscettibile di aggiornamento)

Chassis

KAM/CHS/02F

KAM-500 chassis (base-mounted power supply and housing) - 2 user-slots

KAM/CHS/03F

KAM-500 chassis (base-mounted power supply and housing) - 3 user-slots

KAM/CHS/03U/E

KAM-500 chassis - 3 user-slots

KAM/CHS/04L/B

KAM-500 chassis, narrow form - 4 user-slots

KAM/CHS/05F/SC

KAM-500 chassis - 5 user-slots

KAM/CHS/06U/E

KAM-500 chassis - 6 user-slots

KAM/CHS/09U/E

KAM-500 chassis - 9 user-slots

KAM/CHS/13U/E

KAM-500 chassis - 13 user-slots

Basic Modules

KAD/BCU/101/E

IRIG-106 backplane controller and PCM encoder

KAD/BCU/105/E

Ethernet backplane controller - IENA compatible

KAD/BCU/140/C

Ethernet backplane controller - IENA/iNET-X compatible

KAD/BCU/140/X1

Ethernet backplane controller - IENA/iNET-X compatible

KAD/BCU/142

Fast Ethernet controller with aperiodic transmission and PTP1588 v1 sync

KAD/BIT/101

Built-in self test module

KAM/BIT/102

Built in Test packetiser.

KAD/CDI/101

Interface module for the cockpit display unit (OBE/CDU/001)

KAD/DAC/001/B

8-channel analog outputs with 16-channel discrete outputs

KAD/ENC/005/B

IRIG-106 PCM encoder - 1ch

KAD/ENC/106

IRIG-106 PCM encoder (PMF output)

KAD/ENC/111

CCSDS encoder (Ethernet interface, internal 64MB memory buffer)

KAD/ETH/101/B

DA and programming over Ethernet (IENA compatible)

KAD/ETH/102

iNET-X compatible 2.5Msample/sec data acquisition and programming over Ethernet

SAM/DEC/007/C

Acra KAM-500 programming interface with IRIG-106 PCM decoder

Analog Modules

KAD/ADC/008

Single ended ADC (program. analog gain, three phase power monitor, 1kHz b/w) - 6ch at 20sps

KAD/ADC/010/C

Differential ended ADC (22kHz b/w) - 2ch at 100ksps

KAD/ADC/011/C/10V

Single ended ADC (0.66kHz b/w, ±10V) - 48ch at 8.5ksps

KAD/ADC/011/C/40V

Single ended ADC (1.17kHz b/w, ±40V) - 48ch at 8.5ksps

KAD/ADC/014/D/25m

16 channel bridge A/D converter with voltage excitation and signal conditioning

KAD/ADC/105/B

Differential ended ADC (programmable analog gain, 6kHz b/w) - 8ch at 24ksps

KAD/ADC/106/C

Accelerometer ADC (current excitation, program. analog gain, 6kHz b/w)- 6ch ICP and 2ch D/E at 24ksps

KAD/ADC/109/C/QB120

¼-bridge 120? ADC (current excitation, programmable analog gain, 6kHz b/w) – 8ch at 24ksps

KAD/ADC/109/C/S1

Full-bridge ADC (voltage excitation, programmable analog gain, 6kHz b/w ) – 8ch at 24ksps

KAD/ADC/109/C/S2

Full-bridge ADC (voltage excitation, program. analog gain, sense lines, 6kHz b/w) – 8ch at 24ksps

KAD/ADC/111/10V

48 channel S/E analog-to-digital converter

KAD/ADC/111/40V

48 channel S/E analog-to-digital converter

KAD/ADC/112/100m

Differential ended ADC (3kHz b/w, ±10V) - 24ch at 12ksps

KAD/ADC/112/10V

Differential ended ADC (3kHz b/w, ±10V) - 24ch at 12ksps

KAD/ADC/112/1V

Differential ended ADC (3kHz b/w, ±1V) - 24ch at 12ksps

KAD/ADC/112/40V

Differential ended ADC (3kHz b/w, ±40V) - 24ch at 12ksps

KAD/ADC/113/B

¼-bridge ADC (current excitation, PT100 temp. sensors, 3kHz b/w) - 16ch at 12ksps

KAD/ADC/114/100m

Full-bridge ADC (voltage excitation, strain gages, 3kHz b/w) - 16ch at 12ksps(100m InputRange)

KAD/ADC/114/10V

Full-bridge ADC (voltage excitation, strain gages, 3kHz b/w) - 16ch at 12ksps (10V InputRange)

KAD/ADC/114/1V

Full-bridge ADC (voltage excitation, strain gages, 3kHz b/w) - 16ch at 12ksps (1V InputRange)

KAD/ADC/115

¼-bridge ADC (current excitation, PT1000 temp. sensors, 6.25kHz b/w) - 16ch at 25ksps

KAD/ADC/116/10V

Accelerometer ADC (current excitation, program. analog gain, 3kHz b/w, ±10V) – 12ch at 12ksps

KAD/ADC/116/10VNE

Accelerometer ADC (current excitation option, program. analog gain, 3kHz b/w, ±10V) – 12ch at 12ksps

KAD/ADC/116/1V

Accelerometer ADC (current excitation, program. analog gain, 3kHz b/w, ±1V) – 12ch at 12ksps

KAD/ADC/117/B

Full-bridge ADC (current excitation, programmable analog gain, 6kHz b/w) - 8ch at 24ksps

KAD/ADC/117/B/E12

Full-bridge ADC (current excitation, programmable analog gain, 6kHz b/w) - 8ch at 24ksps

KAD/ADC/118/100m

Full-bridge ADC (voltage excitation, 3kHz b/w, ±100mV) - 12ch at 12ksps

KAD/ADC/118/10V

Full-bridge ADC (voltage excitation, 3kHz b/w, ±10V) - 12ch at 12ksps

KAD/ADC/118/1V

Full-bridge ADC (voltage excitation, 3kHz b/w, ±1V) - 12ch at 12ksps

KAD/ADC/120/100m

Full-bridge ADC (voltage excitation, 3kHz b/w, ±100mV) - 12ch at 12ksps

KAD/ADC/120/10V

Full-bridge ADC (voltage excitation, 3kHz b/w, ±10V) - 12ch at 12ksps

KAD/ADC/120/1V

Full-bridge ADC (voltage excitation, 3kHz b/w, ±1V) - 12ch at 12ksps

KAD/ADC/126/B

Accelerometer ADC (current excitation, programmable analog gain, 25kHz b/w) - 4ch at 100ksps

KAD/ADC/129/S1

Full-bridge ADC (voltage excitation, programmable analog gain, 25kHz b/w) - 4ch at 100ksps

KAD/ADC/129/S2

Full-bridge ADC (voltage excitation, program. analog gain, sense lines, 25kHz b/w) - 4ch at 100ksps

KAD/ADC/135

12-ch. bridge A/D converter with excitation, balancing & signal conditioning

KAD/ADC/135/E12

12-ch. bridge A/D converter with excitation, balancing & signal conditioning (uses ±12V for excitation)

KAD/CDC/002

Differential ended current-to-digital converter (1.1kHz b/w)- 24ch at 17.5ksps

KAD/LDC/101/10K

LVDT/RVDT-to-digital converter (voltage excitation, 6kHz b/w) - 4ch at 24ksps

KAD/LDC/101/2.5K

LVDT/RVDT-to-digital converter (voltage excitation, 6kHz b/w) - 4ch at 24ksps

KAD/LDC/101/400

LVDT/RVDT-to-digital converter (voltage excitation, 6kHz b/w) - 4ch at 24ksps

KAD/LDC/101/5K

LVDT/RVDT-to-digital converter (voltage excitation, 6kHz b/w) - 4ch at 24ksps

KAD/MDC/002

Multiplexing ADC (program. analog gain, pressure scanner, external temp. compensation) - 2ch at 12.5ksps

KAD/MDC/103

Multiplexing ADC (program. analog gain, pressure scanner, polynomial temp. compensation) - 2ch at 20ksps

KAD/SDC/001

Synchro-to-digital converter - 2ch at 24ksps

KAD/TDC/002/D

Thermocouple ADC (reference compensation, 40Hz b/w) - 15ch at 512sps

KAD/TDC/002/D/10m

Thermocouple ADC (reference compensation, 10 mV input range, 40Hz b/w) - 15ch at 512sps

KAD/TDC/102/B

Thermocouple ADC (reference compensation, 250Hz b/w) - 15ch at 1ksps

KAD/TDC/107

Thermocouple ADC (reference compensation, high accuracy, 4Hz b/w) - 12ch at 8sps

KAM/CDC/101/300

Charge-to-digital converter (piezoelectric sensors, 300Hz b/w) - 4ch at 24ksps

KAM/CDC/101/6K

Charge-to-digital converter (piezoelectric sensors, 6kHz b/w) - 4ch at 24ksps

Bus Modules

KAD/ABM/101

ARINC-429 bus monitor PARSER/SNARFER - 8ch

KAD/ABM/102/B

8-channel ARINC-429 bus monitor and packetizer

KAD/ARI/002

ARINC-429 transmitter - 1ch

KAD/ARI/103

ARINC-573 bus monitor parser - 1ch

KAD/ARR/101

AFDX redundancy remover

KAD/CBM/101

CCDL bus monitor parser - 4ch

KAD/CBM/102

CAN bus monitor parser - 4ch

KAD/CBM/103

4-bus CCDL/MCDL monitor

KAD/CBM/105

CAN bus packetiser

KAD/DEC/003

IRIG-106 PCM decoder/merger - 2ch

KAD/DEC/003

IRIG-106 PCM decoder/merger - 2ch

KAD/DEC/103

IRIG-106 PCM decoder/merger - 2ch

KAD/EBM/101/B

Ethernet bus monitor parser - 1ch

KAD/EBM/102

Gigabit Ethernet bus monitor parser - 1ch

KAD/EBM/103

Ethernet PARSER for ARINC-429 over RCI NDO Communication Protocol

KAD/FBM/102

Firewire bus monitor parser - 1ch

KAD/FBM/103/B

Firewire S200b bus monitor parser - 1ch

KAD/MBI/001/B

MIL-STD-1553 remote terminal - 1ch

KAD/MBM/101

Dual redundant MIL-STD-1553 bus packetizer

KAD/MSB/103/C

MIL-STD-1553 bus monitor parser - 1ch dual redundant

KAD/PBM/001

Panavia bus monitor parser - 8ch

KAD/PBM/002

MC/ENMC bus monitor snarfer/parser - 1ch

KAD/TBM/101

TTP Bus Monitor

KAD/UAR/002/C

RS-232/422/485 bus monitor parser - 4ch

KAD/UAR/003

RS-422 bus monitor parser - 2ch

KAD/UAR/102/C

RS-232/422/485 bus monitor snarfer/parser - 4ch

KAM/SBM/001

Stanag-3910 bus monitor

KAM/SBM/101

EFA Express Bus Monitor

Video & Voice

KAD/VDC/001

Differential ended voice-to-digital converter (CVSD) - 2ch at 64ksps

KAD/VID/103/B

MPEG-4 video encoder (analog video input) - 1ch

KAD/VID/106

H.264 video encoder (analog video input) - 1ch

Discrete & Digital Modules

KAD/DPI/002

Data input (RAM reader) - dual-port

KAD/DSI/002

Discrete input (counters, time tagging) - 24ch

KAD/DSI/003/B

Bi-level input (counters, time tagging) - 24ch

KAD/DSI/102/B

24 ch. discrete input module with programmable counters and time tagging

Data Storage

KAD/MEM/004/B/32G

CompactFlash memory module (data extraction via Ethernet, 32GB)

KAM/MEM/103/B

CompactFlash memory module

Time & GPS

KAM/TCG/102/D

Combined GPS and IRIG input

Network Modules

KAD/SWI/101

Ethernet switch - 3 to 1 aggregator

KAD/SWI/102

4-port Ethernet switch module with a dedicated programming port

KAD/SWI/107

4-port Ethernet tap module

KAD/SWI/108

4-port Ethernet Xbar switch module

Nota: i dati riportati in questa tabella sono di semplice riferimento, possono contenere errori, non essere aggiornati e/o subire modifiche in qualsiasi momento; per un'informazione più accurata è necessario fare riferimento al datasheet del prodotto.

Strumentazione COTS per Avionica e Flight Testing
Strumentazione COTS per Avionica e Flight Testing
KAM-500 chassies
KAM-500 chassies
Modulo back-plane controller
Modulo back-plane controller
Modulo ADC di acquisizione segnali analogici
Modulo ADC di acquisizione segnali analogici
Modulo CF Recording
Modulo CF Recording
Software di setup e gestione
Software di setup e gestione

Instrumentation Devices - copyright © 2024 - webdesign ovosodo